EDX6000H
Eaton DX 6000VA Tower
常规信息 | |
拓扑结构 | online double-conversion IGBT with micro-controller |
配置 | Tower |
型号 | EDX6000H |
零件号码 | EDX6000H |
颜色 | Black |
额定(伏安/瓦特) | 6000VA/4200W |
诊断 | Automatic system self test |
UPS旁路 | In-Built Automatic Relay Bypass |
尺寸 (HxWxD, mm) | 717 x 260 x 570 |
重量 (kg) | 90 |
质保 | 1 year standard warranty |
效率 | >88% |
电输入 | |
输入连 接 |
Hardwired - see manual for terminal block layout
|
输入电缆 | Hardwired |
输入电压范围 | 122V to 300V |
标称输入电压(Vac) | 220V |
电压范围 | 208/220/230/240V |
工作频率 | 50/60Hz |
运行频率 | 60Hz |
频率程度 | 46Hz - 64Hz |
输入功率因数 | > 0.95pf |
输入电流失真 | <30% THDi |
电输出 | |
标称输出电压 | 208/220/230/240V |
标称电压 | 220V |
电压范围 | 220/230/240V |
输出电压调节 | ±1% |
输出连接 |
Hardwired - see manual for terminal block layout
|
输入电压校准 | ±1% |
On Battery 输出稳压 | ±1% |
功率因数 | 0.7 |
效率 (正常运行) | >88% |
输出频率 | 50 / 60Hz |
频率校准 | ±0.1Hz |
转换时间 | 0ms |
负载波形 | 3:1 |
电池描述 | Valve Regulated Lead Acid, AGM |
电池类型 | 20x 12V, 7 Ah |
由电池启动运行 | Unit can be started without being connected to AC utility power -- allows for portable power source |
二次充电时间 | < 7 hours to recover 90 percent of nominal backup |
通信 | |
用户界面 | Led's |
发光二极管 | LED mimic diagram with 4 x LEDs for Utility, Bypass, Inverter & Battery Status, |
警报器 | Battery Operation Mode, Low Battery, General Fault, Overload, On Bypass |
标准通信端口 | 1 off Intelligent-Slot (Empty), 1 x RS232 *9 Serial Port |
继电器输出 | Sim |
通信槽 | Sim - 1 Slot |
电能管理软件 | WINPOWER power management software, included on CD |
环境 | |
1米处的噪声 | <55* |
工作温度 | 0°C to 40°C |
标志 | CE |
电磁兼容 | IEC/EN 62040-2 Category C3 |
标识 | CE |
数据输电线路保护装置 | Input / output jacks included for telephone / modem / internet line surge protection |
存储温度 | 0°C to 40°C |
相对湿度 | 5 to 95%, no condensation allowed |
海拔高度 | 1000m above sea level |
'Due to continuing product improvement programs, specifications are subject to change without no
www.eaton-ups.com